Clarion CD Player DXZ938R User Manual

Owner’s manual / Mode d’emploi  
Bedienungsanleitung / Istruzioni per l’uso  
Gebruiksaanwijzing / Manual de instrucciones  
Bruksanvisning / Manual de instruções  
DXZ938R  
HIGH END RDS-EON AM/FM RADIO CD-PLAYER  
COMBINATION  
COMBINE RADIO AM/FM RDS-EON-LECTEUR CD HAUT  
DE GAMME  
VIELSEITIGE RDS-EON AM/UKW-CD-SPIELER-  
KOMBINATION  
COMBINAZIONE DI RADIO RDS-EON AM/FM DI ALTO  
LIVELLO E LETTORE CD  
HOOGWAARDIGE RDS-EON AM/FM RADIO CD-SPELER  
COMBINATIE  
COMBINACIÓN DE RADIO DE RDS-EONY AM/FMY  
REPRODUCTOR DE DISCOS COMPACTOS  
KOMBINERAD RDS-EON AM/FM-RADIO OCH  
CD-SPELARE I TOPPKLASS  
COMBINAÇÃO DE LEITOR DE CDs E RÁDIO RDS-EON  
AM/FM DE ALTA GAMA CARACTERÍSTICAS  
EON  
 
Thank you for purchasing this Clarion product.  
Please read this owner’s manual in its entirety before operating this equipment.  
After reading this manual, be sure to keep it in a handy place (e.g., glove compartment).  
Check the contents of the enclosed warranty card and keep it carefully with this manual.  
This manual includes the operating procedures of the CD changer, MD changer, AUX, DAB, DSP,  
DVD, PHONE MUTE and TV tuner connected via the CeNET cable. The CD changer, MD changer  
and TV tuner have their own manuals, but no explanations for operating them are described.  
CAUTIONS:  
OBS!  
This appliance contains a laser system and  
is classified as a “CLASS 1 LASER  
Apparaten innehåller laserkomponenten  
som avger laserstrålning överstigande  
gränsen för laserklass 1.  
PRODUCT”. To use this model properly,  
read this Owner’s Manual carefully and keep  
this manual for your future reference. In  
case of any trouble with this player, please  
contact your nearest “AUTHORIZED service  
station”. To prevent direct exposure to the  
laser beam, do not try to open the enclosure.  
VAROITUS  
Suojakoteloa si saa avata. Laite sisältää  
laserdiodin, joka lähettää näkymätöntä  
silmille vaarallista lasersäteilyä.  
!CAUTION  
MODEL  
USE OF CONTROLS OR ADJUSTMENTS OR  
PERFORMANCE OF PROCEDURES OTHER  
THAN THOSE SPECIFIED IN THE OWNER’S  
MANUAL MAY RESULT IN HAZARDOUS  
RADIATION EXPOSURE.  
ADVARSEL.  
Denne mærking er anbragt udvendigt på  
apparatet og indikerer, at apparatet arbejder  
med laserstråler af klasse 1, hvilket betyder,  
at der anvendes laserstråler af svageste  
klasse, og at man ikke på apparatets  
yderside kan blive udsat for utilladelig  
kraftig stråling.  
APPARATET BØR KUN ÅBNES AF  
FAGFOLK MED SÆRLIGT KENDSKAB TIL  
APPARATER MED LASERSTRÅLER!  
Indvendigt i apparatet er anbragt den her  
gengivne advarselsmækning, som advarer  
imod at foretage sådanne indgreb i  
apparatet, at man kan komme til at udsaætte  
sig for laserstråling.  
2
DXZ938R  
Display Items  
Contents  
1. For safety’s sake, always close the DUAL AC-  
TION before leaving this unit unused for a pro-  
longed period or switching OFF the ignition key.  
4. After a disc is ejected, the DUAL ACTION  
automatically returns to the tilted or closed  
state. If there is any obstruction when the  
DUAL ACTION tries to close, the safety  
mechanism is triggered and the DUAL AC-  
TION returns to the open state. If this hap-  
pens, remove the obstruction, then press the  
[O] button.  
1. PRECAUTIONS............................................................................................................................... 3  
Dual Action ...................................................................................................................................... 3  
Handling Compact Discs ................................................................................................................. 4  
: DAB indication  
: Alternative frequency indication  
: Regional indication  
:Traffic announcement indication  
:Traffic programme indication  
: Programme type indication  
: Information indication  
Operation status indication  
Titles, PS names, CT(clock),  
etc. are displays.  
If you switch OFF the ignition key with the  
DUAL ACTION tilted, the DUAL ACTION  
does not close.  
2. CONTROLS..................................................................................................................................... 5  
3. NOMENCLATURE .......................................................................................................................... 6  
Names of the Buttons and their Functions ...................................................................................... 6  
Major button operations when external equipment is connected to this unit ................................... 7  
Display Items ................................................................................................................................... 8  
LCD Screen ..................................................................................................................................... 8  
2. Before the DUAL ACTION closes, there may  
be a braking sound from the safety mecha-  
nism. This is normal.  
5. To avoid scratching the compact disk, keep  
the 12 or 8 cm CD level when inserting or re-  
moving them.  
: Mute indication  
3. If you move the DUAL ACTION by hand, this  
may create play. To correct this play, with the  
power on for the unit, press the [O] button to  
close the DUAL ACTION.  
4. DCP ................................................................................................................................................. 9  
5. REMOTE CONTROL ..................................................................................................................... 10  
Names of Parts .............................................................................................................................. 10  
Functions of Remote Control Unit Buttons .................................................................................... 10  
Loading Batteries........................................................................................................................... 10  
Attaching the Remote Control Unit to the Steering Wheel............................................................. 11  
Handling Compact Discs  
6. OPERATIONS ............................................................................................................................... 12  
Basic Operations ........................................................................................................................... 12  
AC-Processor II Operations ........................................................................................................... 14  
Radio Operations ........................................................................................................................... 17  
RDS Operations............................................................................................................................. 18  
CD Operations ............................................................................................................................... 21  
Operations Common to Each Mode .............................................................................................. 23  
back out of the CD player or it may damage  
the CD player.  
Use only compact discs bearing the  
mark.  
or  
• Do not use compact discs that have large  
scratches, are misshapen, cracked, etc. Use  
of such discs may cause misoperation or  
damage.  
Do not play heart-shaped, octagonal, or other  
specially shaped compact discs.  
: Stereo indication  
Some CDs recorded in CD-R mode may not be  
usable.  
Anti-theft  
indication  
: Manual indication  
7. OPERATIONS OF ACCESSORIES .............................................................................................. 27  
CD/MD/DVD Changer Operations ................................................................................................. 27  
TV Operations................................................................................................................................ 29  
Digital Radio/DAB Operations ....................................................................................................... 30  
DVD Deck Operations .................................................................................................................... 33  
To remove a compact disc from its storage  
case, press down on the center of the case  
and lift the disc out, holding it carefully by the  
edges.  
Even when recorded in CD-R/W mode, some  
CDs not be usable.  
Function mode indication  
The names of modes being  
selected,etc.are displayed.  
• Do not use commercially available CD protec-  
tion sheets or discs equipped with stabilizers,  
etc. These may damage the disc or cause  
breakdown of the internal mechanism.  
:Disc indication  
Handling  
8. IN CASE OF DIFFICULTY ............................................................................................................ 34  
9. ERROR DISPLAYS ....................................................................................................................... 35  
10. SPECIFICATIONS ....................................................................................................................... 302  
Preset channel indication (1 to 6)  
Disc number indication (1 to 12)  
• Compared to ordinary music CDs, CD-R and  
CD-RW discs are both easily affected by high  
temperature and humidity and some of CD-R  
and CD-RW discs may not be played.  
:Scan indication  
:Repeat indication  
:Random indication  
: Music mode indication  
: Matrix mode indication  
Storage  
Therefore, do not leave them for a long time in  
the car.  
• Do not expose compact discs to direct sun-  
light or any heat source.  
• New discs may have some roughness around  
the edges. If such discs are used, the player  
may not work or the sound may skip. Use a  
ball-point pen or the like to remove any rough-  
ness from the edge of the disc.  
: Movie mode indication (indicate within DTS/DOLBY DIGITAL)  
• Do not expose compact discs to excess hu-  
midity or dust.  
1. PRECAUTIONS  
1. This unit is applicable for on-road 4 wheel  
vehicle purpose only. Use for tractor, fork  
truck, bulldozer, off road vehicle, 2 or 3 wheel  
motor bicycle, marine boat or other special  
purpose vehicle is not appropriate.  
:Virtual mode indication (indicate within DTS/DOLBY DIGITAL)  
:VSE indication (VSE:Virtual Space Enhancer)  
• Do not expose compact discs to direct heat  
from heaters.  
INFORMATION FOR USERS:.  
CHANGES OR MODIFICATIONS TO THIS  
PRODUCT NOT APPROVED BY THE MANU-  
FACTURER WILL VOID THE WARRANTY.  
: Parametric Equalizer indication  
: Auto volume indication  
• Never stick  
Ball-point pen  
Cleaning  
To remove fingermarks and dust, use a soft  
cloth and wipe in a straight line from the cen-  
ter of the compact disc to the circumference.  
labels on the  
surface of the  
compact disc or  
mark the surface  
Roughness  
: Dolby Pro Logic indication  
2. When the inside of the car is very cold and  
the player is used soon after switching on the  
heater moisture may form on the disc or the  
optical parts of the player and proper play-  
back may not be possible. If moisture forms  
on the disc, wipe it off with a soft cloth. If  
moisture forms on the optical parts of the  
player, do not use the player for about one  
hour. The condensation will disappear natu-  
rally allowing normal operation.  
Dual Action  
This unit uses dual action to make large-screen  
displays possible.  
: DTS indication (indicate within DTS/DOLBY DIGITAL)  
with a pencil or pen.  
• Do not use any solvents, such as commer-  
cially available cleaners, anti-static spray, or  
thinner to clean compact discs.  
• Never play a compact  
disc with any cellophane  
tape or other glue on it or  
with peeling off marks. If you try to play such a  
compact disc, you may not be able to get it  
• After using special compact disc cleaner, let  
the compact disc dry off well before playing it.  
When you use the dual action, be sure to close it.  
CAUTION  
BE CAREFUL NOT TO GETYOUR FINGERS  
CAUGHT WHEN OPENING AND CLOSING  
THE DUAL ACTION.  
LCD Screen  
Be sure to unfold and read the next page. / Veuillez déplier et vous référer à la page suivante.  
Bitte ausbreiten und die nächste Seite lesen. / Assicurarsi di aprire e leggere la pagina successiva.  
Volgende pagina uitvouwen en doorlezen a.u.b. / Cerciórese de desplegar y de leer la página siguiente.  
Glöm inte att vika ut och läsa nästa sida. / Não deixe de abrir e ler a próxima página.  
In extreme cold, the screen movement may slow down and the screen may darken, but this is normal.  
The screen will recover when it returns to normal temperature.  
3. Driving on extremely bumpy roads which cause  
severe vibration may cause the sound to skip.  
8
DXZ938R  
DXZ938R  
3
DXZ938R  
4
 
Major button operations when external equipment is  
connected to this unit  
CONTROLS / LES COMMANDES / REGLER / CONTROLLI  
REGELAARS / CONTROLES / KONTROLLER / CONTROLOS  
3. NOMENCLATURE  
2.  
Note:  
[TA] button  
• Use the button to set the TA (Traffic An-  
nouncement) standby mode in the DAB mode.  
(This function is only DAB tuner.)  
When the CD/MD/DVD changer  
is connected  
For details, see the section “CD/MD/DVD  
• Be sure to read this chapter referring to the front diagrams of chapter “2. CONTROLS” on page 5 (unfold).  
Names of the Buttons and their Functions  
Main unit / Appareil principal / Hauptgerät / Apparecchio principale  
Hoofdtoestel / Unidad principal / Huvudenhet / Unidade principal  
changer operations”. For the DVD  
changer, refer to the Owner’s Manual pro-  
vided with the DVD changer.  
[AF] button  
[RELEASE] button  
• Deeply press the button to remove the DCP.  
[P/A] button  
Press the button to turn on or off the AF (Alter-  
native Frequency) function in the DAB mode.  
(This function is only DAB tuner.)  
• Performs preset scan while in the radio mode.  
When the button is pressed and held, auto  
store is performed.  
[
]
[
]
FNC  
VSE  
[
] button  
[VSE] button  
Press to enter VSE mode or the Position mode.  
• Plays or pauses a CD, MD or DVD.  
[
]
EQ  
[
]
RELEASE  
[P/A] button  
• Performs scan play for 10 seconds for each  
track while in the CD mode.  
[DISP] button  
• Switches CT or select disc titles mode.  
When the button is pressed and hold for 1 sec-  
ond or longer, the mode is turned on or off.  
• Performs preset scan while in the radio mode.  
When the button is pressed and held, auto  
store is performed. (This function is only TV  
tuner.)  
[
[
]
O
[BND] button  
• Switches the band, or seek tuning or manual  
• When the button is pressed and held,  
switches the disc titles or track titles while in  
the MD changer mode.  
[EQ] button  
• Press to enter the EQ mode.  
]
DISP  
tuning while in the radio mode.  
[
]
A-M  
[BND] button  
• Switches the band.  
When the button is pressed and hold for 1 sec-  
ond or longer, the mode is turned on or off.  
• Plays a first track while in the CD mode.  
• When the button is pressed and held,  
switches the user titles or track titles ,etc.while  
in the CD changer mode.  
[
]
PTY  
[TITLE] button  
• Use the button to input a title in the CD mode.  
• When the button is pressed and held,  
switches seek tuning or manual mode.  
[FNC] button  
• Press the button to turn on the power.  
Press and hold the button for 1second or  
longer to turn off the power.  
[
]
TA  
[PTY] button  
• Performs random play. Also performs disc ran-  
dom play when the button is pressed and held  
[
]
P/A  
[
]
DIRECT  
• Press and hold the button for 1 second or  
longer to enter the adjust mode.  
[a], [d] button  
[ ]  
AF  
[
]
ROTALY  
[
]
[
]
BND  
TITLE  
• Selects a station.  
[DIRECT] button  
[a], [d] button  
• Switches the operation mode among the ra-  
dio mode, etc.  
[AF] button  
Stores a station into memory or recall it directly.  
• Selects a station while in the radio mode or  
selects a track when listening to a CD. These  
buttons are used to make various settings.  
Performs repeat play. When this button is  
With the DUAL ACTION opened / Lorsque la Double action est ouverte  
SCHRÄGKONSOLE geöffnet / Con la DOPPIA AZIONE aperta  
Met het DUAL ACTION bedieningspaneel geopend / Con el panel frontal de acción doble abierto  
Med den nedfällbara panelen öppen / Com o painel de DUPLA ACÇÃO aberto  
pressed and held, disc repeat play is performed.  
[
] button  
When the DTS/DOLBY DIGITAL  
is connected  
For details, see the owner’s manual of the  
DTS/DOLBY DIGITAL.  
• Plays or pauses a CD while in the CD mode.  
[P/A] button  
[ROTARY] knob  
• Adjust the volume by turning the knob clock-  
• Performs scan play for 10 seconds for each  
track. Disc scan play is performed when the  
button is pressed and held.  
• Used as “Enter button” while the unit is in  
the ADJ mode.  
wise or counterclockwise.  
[O] button  
• Use the button to open the dual action.  
• Use the knob to perform various settings.  
[VSE] button  
• Press the button to turn on the DSF.  
[BND] button  
• Plays a first track.  
[
] BUTTON  
[
] BUTTON  
CD EJECT  
RESET  
[
]
CD SLOT  
[PLII] button  
• Press to select Dolby Pro Logic II mode.  
[DISP] button  
• Switches the display indication(Main  
• After DSF is selected, press and hold the  
[VSE] button for 1 second or longer to turn to  
off DSF effect.  
• Used as “disc up button” while the unit is in  
the DVD changer mode.  
[DIRECT] button  
display,clock display).  
[TITLE] button  
• Use the button to input a title in the CD  
changer mode.  
• Stores a station into memory or recall it di-  
After DSF is selected, press the [BND] button  
and then the [DIRECT] button to select the  
DSF menu.  
[A-M] button  
rectly while in the radio mode.  
Use the button to switch to the audio mode (bal-  
ance/fader/sub.w/center SP/NF. adjustment)  
[CD SLOT]  
Use the button to scroll the title during CD-text play  
or MD changer play in the CD changer mode.  
• CD insertion slot.  
[PLII] button  
[PTY] button  
• Use the button to set the PTY (Programme  
[CD EJECT] button  
• Press the button to turn on the PLII, and each  
time to press PLII mode changes following or-  
der:  
[a], [d] button  
• Press to eject a CD loaded in the unit.  
Type) standby mode or PTY items.  
• Selects a track when listening to a disc.  
• Press to open the CD slot and insert a CD.  
• Performs random play while in the CD mode.  
[DIRECT] button  
• Designates the disc to be played.  
Music mode Matrix mode Movie mode  
Virtual mode mode off  
[RESET] button  
[TA] button  
• Press to reset the system.  
• Use the button to set the TA (Traffic An-  
When theTV/DAB is connected  
nouncement) standby mode.  
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.  
Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.  
Hinweis: Bitte diese Seite ausfalten und beim Lesen der einzelnen Kapitel die Frontdiagramme beachten.  
Nota: Assicurarsi di aprire questa pagina e fare riferimento a questi diagrammi quando si legge ciascun capitolo.  
Opmerking: Vouw deze pagina uit en zie tevens de afbeeldingen van het voorpaneel tijdens het doorlezen van de volgende hoofdstukken.  
For details, see the section “TV opera-  
tions” or “DAB operations”.  
[AF] button  
• Press the button to turn on or off the AF (Al-  
ternative Frequency) function.  
[PTY] button  
• Plays repeatedly while in the CD mode.  
Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.  
Observera: Vik ut denna sida för att kunna se figurerna över bilstereons framsida medan du läser de olika kapitlen.  
Nota: Certifique-se de abrir esta página e consulte os diagramas frontais conforme realiza a leitura de cada capítulo.  
Use the button to set the PTY (Programme Type)  
• When the button is pressed and held,  
Reginal function can select ON or OFF.  
standby mode or PTY items in the DAB mode.  
Switches the TV picture mode or VTR (external)  
picture mode.  
5
DXZ938R  
6
DXZ938R  
DXZ938R  
7
 
4. DCP  
The control panel can be detached to prevent  
theft. When detaching the control panel, store it  
in the DCP (DETACHABLE CONTROL PANEL)  
case to prevent scratches.  
CAUTION  
• Always close the DUAL ACTION before remov-  
ing the DCP.  
• If you remove the DCP with the DUAL ACTION  
open, the sloping console closes immediately.  
Be careful not to get your fingers caught.  
We recommend taking the DCP with you when  
leaving the car.  
• The DCP can easily be damaged by shocks.  
After removing it, be careful not to drop it or  
subject it to strong shocks.  
Removing the DCP  
1. With the DUAL ACTION closed, turn off the  
power.  
• If the [RELEASE] button is pressed and the  
DCP is not locked into place, it may fall out  
from vibration of the car.This can break the  
DCP, so after removing it, either install it on  
the unit or put it in its DCP case.  
2. Press the [RELEASE] button deeply and  
take and pull the DCP to detach the DCP.  
• The connector connecting the unit and the  
DCP is an extremely important part. Be careful  
not to damage it by pressing on it with finger-  
nails, screwdrivers, etc.  
• If you apply to the control panel more force  
than that required with the control panel left  
open, the control panel will go down one step.  
This is due to safety mechanism engaged and  
is not a malfunction. In this case, press the [O]  
button two times to return the control panel to  
the original operating position. Using the con-  
trol panel being lowered results in a damage  
to the panel.  
Attaching the DCP  
1. Insert the DCP so that the A section on the  
right side of the DCP catches on the hook B  
on the unit.  
• Do not use the control panel being left open  
as a tray to put an object on.  
Moving the control panel manually will cause a  
malfunction such as getting out of order of the  
sloping mechanism, breakdown of the gears,  
etc. Do not draw the control panel forcibly.  
When the control panel is moved manually,  
press the [O] button several times to see if the  
control panel returns to the normal position  
and functions properly.  
• Do not remove the DCP while you are driving  
a car.  
2. Press the left side C of the DCP carefully to  
fit it in place.  
• Do not use the DCP being rickety.  
• Do not carry the DCP in a trouser pocket or  
the like directly. (The DCP may be damaged  
under load conditions.)  
• The DCP may jump out of the DCP case hous-  
ing the DCP when the case is opened ener-  
getically.  
Note:  
• If the DCP is dirty, wipe off the dirt with a soft, dry  
cloth only.  
DXZ938R  
9
 
5. REMOTE CONTROL  
Names of Parts  
Joystick  
wz Volume control  
ad Search  
BND (Band) button  
FNC (function)  
Top button  
Disc Up button  
Program button  
BND  
Functions of Remote Control Unit Buttons  
Mode  
Button  
Radio  
(DAB) (RDS)  
CD/MD changer  
DVD changer  
CD  
TV  
Switches among radio, DAB, CD, DVD deck, CD/MD changer, DVD changer, TV, and AUX.  
[FUNC]  
Plays the first track.  
Top play.  
Moves the next disc  
in increasing order.  
Switches reception  
band.  
Switches reception  
band.  
[BAND]  
Increases and decreases volume (in all modes).  
[
[
] , [  
] , [  
]
]
Moves preset  
channels up and  
down.  
Moves tracks up and down.  
When pressed and held for 1 second:  
Fast-forward/fast-backward.  
Moves preset  
channels up and  
down.  
Some of the corresponding buttons on the main unit and remote control unit have different functions.  
Loading Batteries  
1. Open the battery cover.  
Battery cover  
2. Insert the supplied lithium battery (CR2032) with the plus + symbol facing up and close the battery  
cover.  
Lithium battery  
10  
DXZ938R  
 
Notes:  
Using batteries improperly can cause them to explode. Take note of the following points:  
• Do not short-circuit, disassemble or heat batteries.  
• Do not dispose of batteries into fire or flames.  
• Dispose of spent batteries properly.  
Attaching the Remote Control Unit to the Steering Wheel  
1. Attach the holder to the steering wheel.  
The diagrams below show how to install the remote control unit on the steering wheel of a car with  
the steering wheel on the Left. Install the remote control unit on the Left in a car with the steering  
wheel on the right side.  
Attachment to a left hand drive car  
Attachment to a right hand drive car  
Holder  
Holder  
2. Installing the steering wheel remote control unit  
Attachment to a left hand drive car  
Attachment to a right hand drive car  
Steering wheel remote control unit  
Steering wheel remote control unit  
Holder  
Holder  
Screw with washer (2.6 5)  
Screw with washer (2.6 5)  
Attachment to a left hand drive car  
Attachment to a right hand drive car  
Align  
Steering wheel remote control unit  
Steering wheel remote control unit  
Holder  
Holder  
Clearance  
Note:  
The location to be chosen for the remote control unit depends on the configuration of the steering wheel.  
Make sure that the installation of the remote control unit does not prevent normal driving and that the remote  
control signal reaches the remote control sensor.  
DXZ938R  
11  
 
6. OPERATIONS  
Note:Be sure to read this chapter referring to the front diagrams of  
Basic Operations  
chapter “2. CONTROLS” on page 5 (unfold).  
Adjusting the volume  
Turning the [ROTARY] knob clockwise increases  
the volume; turning it counterclockwise de-  
CAUTION  
Be sure to lower the volume before switch-  
ing off the unit power or the ignition key.The  
unit remembers its last volume setting. If you  
switch the power off with the volume up,  
when you switch the power back on, the sud-  
den loud volume may hurt your hearing and  
damage the unit.  
creases the volume.  
The volume level is from 0 (minimum) to 33 (maxi-  
mum).  
Switching the display  
Press the [DISP] button to select the desired display.  
Each time you press the [DISP] button, the dis-  
play switches:  
Turning on/off the power  
Note:  
Once selected, the preferred display becomes the  
display default. When a function adjustment such  
as volume is made, the screen will momentarily  
switch to that function’s display, then revert back to  
the preferred display several seconds after the ad-  
justment.  
• Be careful about using this unit for a long time  
without running the engine. If you drain the car’s  
battery too far, you may not be able to start the  
engine and this can reduce the service life of the  
battery.  
1. Press the [FNC] button.  
When you have entered a title in a CD/MD, it ap-  
pears in the main display. If you have not entered a  
title, “D NO-TITLE” or “T NO-TITLE” appears in  
the title display instead. For information on how to  
enter a title, refer to the subsectionEntering titles”  
in section “Operations Common to Each Mode ”.  
2. The illumination and display on the unit light  
up. The unit automatically remembers its last  
operation mode and will automatically switch  
to display that mode.  
3. Press and hold the [FNC] button for 1 second  
When CT data is not received, “CT––:––” appears  
in the display.  
or longer to turn off the power for the unit.  
Note:  
• System check  
Adjusting the balance  
1. Press the [A-M] button and select “BAL-  
ANCE”.  
The first time this unit is turned on after the wire  
connections are completed, it must be checked  
what equipment is connected. When the power is  
turned on, “SYSTEM CHCK” and “PUSH  
POWER” appear in the display alternately, so  
press the [FNC] button. The system check starts  
within the unit. When the system check is com-  
plete, the power is turned off, so press the [FNC]  
button again.  
2. Turning the [ROTARY] knob clockwise em-  
phasizes the sound from the right speaker;  
turning it counterclockwise emphasizes the  
sound from the left speaker.  
The factory default setting is “0”. (Adjustment  
range: L13 to R13)  
Selecting a mode  
1. Press the [FNC] button to change the opera-  
tion mode.  
3. When the adjustment is complete, press the  
[A-M] button several times until the function  
mode is reached.  
2. Each time you press the [FNC] button, the  
operation mode changes in the following or-  
der:  
Adjusting the fader  
1. Press the [A-M] button and select “FADER”.  
Radio mode DAB mode CD mode ➜  
DVD DECK mode CD changer mode ➜  
MD changer mode DVD changer mode ➜  
TV mode AUX mode Radio mode...  
External equipment not connected with  
CeNET is not displayed.  
2. Turning the [ROTARY] knob clockwise em-  
phasizes the sound from the front speakers;  
turning it counterclockwise emphasizes the  
sound from the rear speakers.  
The factory default setting is “0”. (Adjustment  
range: F12 to R12)  
12  
DXZ938R  
 
Basic Operations  
Note:  
3. When the adjustment is complete, press the  
[A-M] button several times until the function  
mode is reached.  
• When CTR + SW are chosen, audio output from  
CTR is not available except in the PL II mode.  
Center Speaker and Sub Woofer On / Off  
Select PLII Mode on and SP setting to  
CTR+SW” mode  
Operation BASS/TREB  
1. Press the “BASS/TREB” mode. Each time  
the [EQ] button is pressed, the adjusting item  
BASS” or “TREB” is changed cyclically.  
1. Press and hold the [TITLE] button for 1 sec-  
ond or longer.  
2. Turn the [ROTARY] knob clockwise or coun-  
terclockwise to adjust “BAS/TREB”.  
2. Press the [a] or [d] button to select the  
SP SEL”.  
3. Press the [EQ] button to return to the previ-  
ous mode.  
3. Press the [  
] button to adjust the “CTR-  
The Adjustment range is from -6dB to +6dB  
for bass and treb.  
SP” “SUB W”.  
4. Turn the [ROTARY] knob clockwise or coun-  
terclockwise to select “ON” or “OFF”.  
This parameter is reflected STD PRO mode  
This function is useful for Speaker Setting  
Problems.  
Speaker Setting  
You can set up your favorite sound environment  
using “Dolby Surround Pro logic II” or “AC-  
Processor II” so that you can enjoy a dynamic  
sound of 5.1 ch surround or 4ch + 2ch speaker.  
Filter Adjustment  
1. Select Dolby Pro Logic II or AC-ProII mode  
and press and hold the [TITLE] button for 1  
second or longer.  
Dolby Pro Logic II 5.1ch surround  
Center SP +Front L.R. +Surround L.R. +Sub  
Woofer.  
2. Press the [a] or [d] button to select the  
FILTER”.  
To make the most of the sound field reproduc-  
tion of Dolby Pro Logic II, a speaker system of  
5.1 channel is recommendable. It has been also  
designed so that a sound filed effect almost as  
good as that of 5.1 channel reproduction can be  
obtained even by a constitution of 4 channel + 1  
channel (subwoofer).  
3. Press the [  
] button to adjust the “SUB-W  
LPF” or “HPF”.  
4. Turn the [ROTARY] knob clockwise or coun-  
terclockwise to adjust filter frequency.  
Sub Woofer Low Pass Filter Adjustment  
Range is 50, 80, 120Hz (18dB/oct), OFF.  
When PLII mode Sub Woofer Low pass Filter  
Adjustment Range is 50, 80, 120Hz (12dB/  
oct.), OFF.  
If you using Dolby Pro Logic source and your  
speaker is only four Front L.R. + Surround L.R.,  
speaker setting will be better to CTR+SW and  
CTR OFF, so Center channel divided to Front  
L.R. automatically.  
High Pass Filter adjustment Range is 50, 80,  
120Hz(12dB/oct), thrgh.  
Note:  
Note  
• High pass filter adjustment is available for Front  
2ch and Rear 2ch only AC-ProII PRO Mode.  
• When SW-L + SW-R are chosen, audio output  
from SW-L is not available in the PL II mode.  
AC- Processor II  
CT (Clock Time) function  
Front L.R. + Rear L.R.+ Sub Woofer L.R. (4ch +  
2ch)  
The CT function receives CT data sent from an  
RDS station and displays the time. Press the  
[DISP] button to switch to the CT display.  
To make the most of the sound field reproduc-  
tion of AC-Processor II, a speaker system of 4  
channel + 2 channel is recommendable.  
If a CT data is not being received, “CT––:––” ap-  
pears in the display.  
1. Press and hold the [TITLE] button for 1 sec-  
ond or longer and enter “ADJ” mode.  
Note:  
• CT data is not transmitted in some countries and  
by some broadcast stations. Also, in some areas,  
the CT may not display accurately.  
2. Press the [a] or [d] button to select the  
SP-SETTING”.  
3. Turn the [ROTARY] knob clockwise or coun-  
terclockwise to select “SW L+SW R” or “CTR  
+SW” mode.  
DXZ938R  
13  
 
AC-Processor II Operation  
Adjusting Dolby Pro Logic II Operation  
1. Select Dolby Pro Logic II mode and press  
and hold the [TITLE] button for 1 second or  
longer to enter “ADJ” mode.  
Dolby Pro Logic II  
Dolby Pro Logic II is a matrix decoding technol-  
ogy in which the updated digital matrix technol-  
ogy is applied and Dolby Pro Logic is further im-  
proved. It realizes excellent 5.1 channel repro-  
duction of Dolby surround source as well as ste-  
reo sound sources such as CDs, thereby caus-  
ing a surround channel to be full-ranged (20 Hz  
to 20 kHz) and become stereo. Therefore, you  
can enjoy any stereo sources with dynamic  
sound of 5.1 channel. According to a source to  
be reproduced, Music Mode or Matrix Mode can  
be selected.  
2. Press the [a] or [d] button to select the  
PLII DELAY”.  
3. Press the [  
] button to adjust the “PLII  
DELAY”.  
4. Turn the [ROTARY] knob clockwise or coun-  
terclockwise to make the adjustment.  
The adjustment range of surround speaker de-  
lay is from 0m sec. to 15m sec.  
The adjustment made in “PLII DELAY” is re-  
flected in the each mode.  
Manufactured under license from Dolby Laborato-  
ries. “Dolby”, “Pro Logic” and the double-D sym-  
bol are trademarks of Dolby Laboratories.  
Adjusting Music Mode  
Use the MUSIC MODE to make more detailed  
adjustments.  
Music Mode  
This mode is suitable for stereo sources like  
CDs. By optimizing frequency characteristics of  
the surround channel, a broader and deeper  
sound is assured. In addition, since broadness  
of the sound field varies with recording condi-  
tions of music sources, there is Adjusting Mode  
which makes a finer tuning available.  
1. Select Music Mode” and press and hold the  
[TITLE] button for 1 second or longer.  
2. Press the [a] or [d] button to select the  
PLII CONT”.  
3. Press the [  
] button to adjust the “PLII  
Matrix Mode  
CONT” detail items.  
This mode is suitable for AM/FM radio.  
4. Press the [a] or [d] button to select the  
items.  
Selection and switching of the  
5. Turn the [ROTARY] knob clockwise or coun-  
terclockwise to make the adjustment.  
Dolby Pro Logic II effect  
While the “Dolby PLII” indication is lit in the dis-  
play, the “Dolby PLII” effect is set to “On”.  
The detailed adjustments depend on each of  
the adjustment items.There are 3 items:  
PANORAMA”, “DIMENSION”, and “CTR  
WIDTH”.  
1. Setting the speaker 5.1ch ( For detail, see the  
section Basic Operation - Speaker setting).  
PANORAMA (Y or N):  
2. Press the [PLII] button so that PLII mode is  
turned on. Each time the button is pressed,  
the mode changes as follows: “MUSIC  
MODEMATRIX MODEPLII OFF  
MODEMUSIC MODE”  
Selecting PANORAMA mode will extend the  
front sound field image to the rear. If sur-  
round effect does not seem to be presented  
sufficiently, select the setting position “Y”.  
DIMENSION (0 to 6):  
3. Select the “PLII OFF MODE” to turn off the  
Dolby Pro Logic II effect. Also press the  
[VSE] button or [EQ] button to turn off the  
Dolby Pro II.  
Selecting DIMENSION mode will shift the  
sound field image to the front or the rear. If  
the balance of the sound field image is too  
much pulled towards the front or rear, the  
balance front/rear can be corrected The ad-  
justing value 3 is the center position. The  
range of 3 to 0 shifts the balance front/rear to  
the front. The range of 3 to 6 shifts the bal-  
ance front/rear to the rear.  
CTR WIDTH (0 to 7):  
Selecting CTR WIDTH mode will adjust the  
localization of the center channel between  
the center speaker and the front speaker L/R.  
14  
DXZ938R  
 
AC-Processor II Operation  
Distributing the center channel sound to the  
right and left will increase the integrated  
sound field image, providing you with an  
natural spatial feeling of sound.  
Adjusting AC-PII STD  
AC-PII STD makes natural stereo feeling for ev-  
ery seat by virtual space enhancer.  
VSE, which is room simulation, can correct the  
sound pressure inside the car so that the uni-  
form sound effect is obtained at any seats.  
Setting to the value 0 will produce the center  
sound with the center speaker.  
Setting to the value 7 will distribute the cen-  
ter sound to the front speaker L/R as the ex-  
isting stereo sound does.  
1. Select VSE” menu which you want to edit on  
the basis of.  
2. Press and hold the [TITLE] button for 1 sec-  
ond or longer.  
AC-Processor II Operation  
There are 2 modes “STD” (standard) and “PRO”  
(professional) in the AC-ProII.  
1. Setting the speaker to 4ch+2ch (For details,  
refer to the subsection “Speaker Setting” in  
the section “Basic Operations”).  
3. Press the [a] or [d] button to select item  
to be adjusted.  
There are “DIFFUSE” “CAR WIDTH” and “CAR  
LENG” available for the items to be adjusted.  
DIFFUSE  
(Adjusts the correction  
deviation of broadness)  
2. Turn off the PLII mode.  
CAR WIDTH (Adjusts the correction  
deviation of width inside  
the car)  
3. Press and hold the [TITLE] button for 1 sec-  
ond or longer and enter “ADJ” mode.  
4. Press the [a] or [d] button to select the  
AC-PII SEL”.  
CAR LENG (Adjusts the correction  
deviation of length inside  
the car)  
5. Press the [  
] button to select AC-ProII  
mode from “STD” or “PRO”.  
4. Turn the [ROTARY] knob clockwise or coun-  
terclockwise to make the adjustment.  
6. Turn the [ROTARY] knob clockwise or coun-  
terclockwise to select “STD” or “PRO”.  
The adjustment range is from 1 to 10 for  
each item.  
7. Press the [TITLE] button to the previous  
mode.  
5. Press and hold the [DIRECT] buttons for 2  
seconds or longer to store the edited con-  
tents.  
Operation AC-PII STD  
1. Press the [VSE] button to enter VSE mode.  
You can give a title to user memory. For the in-  
putting method of titles, refer to the subsection  
Entering titles” in section “Operations com-  
mon to each mode”.  
2. Press the [BND] button to select “VSE BASIC”.  
3. Press the [DIRECT] button to select VSE  
menu as below.  
1. Flat:  
original sound, flat equalizing  
Operation AC-PII PRO  
Arrival time of sound from the speaker can be  
selected from among five types according to the  
position of the seat. In addition, Time Alignment  
Function enables a pinpoint speaker setting to  
obtain a uniform sound effect from speakers to  
the listner.  
2. Bass boost: deep bass sound empha-  
sized  
3. High boost: middle and high sound area  
emphasized  
4. Impact:  
low and high sound area em-  
phasized  
1. Press the [VSE] button to enter POSITION mode.  
2. Press the Band button to select “POS BASIC”.  
5. Acoustical: middle sound area empha-  
sized (human voice)  
3. Press the [DIRECT] button to select VSE  
6. Smooth:  
quiet and graceful feeling  
menu as below.  
4. Press the [VSE] button to return to the previ-  
1.FRONT-L 2.FRONT-R 3.FRONT 4.REAR  
5.FULL SEAT  
ous mode.  
5. Press and hold the [VSE] button for 1 second  
or longer so that the VSE effect is turned on  
or off.  
4. Press the [VSE] button to return to the previ-  
ous mode.  
DXZ938R  
15  
 
AC-Processor II Operation  
5. Press and hold the [VSE] button for 1 second  
or longer so that the POSITION effect is  
turned on or off.  
Operation P.EQ  
A full range of frequency level can be minutely  
corrected with a smooth curve by frequency cor-  
rection in accordance with car models. Six kinds  
of P.EQ basic menus have been pre-stored in  
this unit according to the car models and the  
mounting positions of speakers. Thus, set it in  
accordance with the car type.  
Adjusting AC-PII PRO  
1. Select VSE” menu which you want to edit on  
the basis of.  
2. Press and hold the [TITLE] button for 1 sec-  
1. Press the [EQ] button to enter “P.EQ mode”.  
ond or longer.  
2. Press the Band button to select “P.EQ BA-  
SIC”.  
3. Press the [a] or [d] button to select item  
to be adjusted.  
3. Press the [DIRECT] button to select P.EQ  
There are “TIME ALIGN” and “SP GAIN” avail-  
able for the items to be adjusted.  
menu as below.  
1.SEDAN-1 2.SEDAN-2 3.WAGON-1  
4.WAGON-2 5.MINI VAN-1 6.MINI VAN-2  
4. Press the [  
].  
5. Press the [a] or [d] button to select the  
channel to be adjusted. Available channels  
are:FRONT-L”, “FRONT-R”, “REAR-L”,  
REAR-R”, “SW-L” and “SW-R”.  
4. Press the [EQ] button to return to the previ-  
ous mode.  
5. Press and hold the [EQ] button for 1 second  
or longer so that the P.EQ effect is turned on  
or off.  
6. Turn the [ROTARY] knob clockwise or coun-  
terclockwise to make the adjustment.  
The adjustment of “TIME ALIGN” range is  
from 0 cm to 500cm.  
Adjusting P.EQ  
1. Select P.EQ” menu which you want to edit  
on the basis of.  
The adjustment of “SP-GAIN” range is from  
0db to -20dB for each channel.  
2. Press and hold the [TITLE] button for 1 sec-  
7. Press and hold the [DIRECT] buttons for 2  
seconds or longer to store the edited con-  
tents.  
ond or longer.  
3. Press the [a] or [d] button to select item  
to be adjusted.  
You can give a title to user memory. For the in-  
putting method of titles, refer to the subsection  
Entering titles” in section “Operations com-  
mon to each mode”.  
There are “FRONT/REAR” ,“BAND” ,“FREQ”  
GAIN” and “Q” available for the items ad-  
justed.  
4. Press and hold the [DIRECT] buttons for 2  
seconds or longer to store the edited con-  
tents.  
EQ Operation  
There are 2 mode for sound EQ “P.EQ” mode  
and “BASS/TREB” mode selecting EQUALIZ-  
ING mode.  
You can give a title to user memory. For the in-  
putting method of titles, refer to the subsection  
Entering titles” in section “Operations com-  
mon to each mode”.  
1. Press and hold the [TITLE] button for 1 sec-  
ond or longer and enter “ADJ” mode.  
The parameter created in this section is also  
effective when the unit is in both the “STD”  
and “PRO” mode.  
2. Press the [a] or [d] button to select the  
AC-PII SEL”.  
3. Press the [  
] button to enter AC-PROII  
select mode “STD” or “PRO”.  
4. Then press the [a] or [d] button to select  
the “EQ SEL”.  
5. Turn the [ROTARY] knob clockwise or coun-  
terclockwise to select “P.EQ” or “BAS/TREB”  
mode.  
6. Press the [TITLE] button to return to the pre-  
vious mode.  
Factory default setting is P.EQ  
16  
DXZ938R  
 
Radio Operations  
Listening to the radio  
1. Press the [FNC] button and select the radio  
mode. The frequency or PS appears in the  
display.  
Manual tuning  
There are 2 ways available: Quick tuning and  
step tuning.  
When you are in the step tuning mode, the fre-  
quency changes one step at a time. In the quick  
tuning mode, you can quickly tune the desired  
frequency.  
PS: Programme service name  
2. Press the [BND] button and select the radio  
band. Each time the button is pressed, the ra-  
dio reception band changes in the following  
order:  
1. Press the [BND] button and select the de-  
sired band (FM or AM (MW/LW)).  
FM1 FM2 FM3 AM (MW/LW) FM1...  
If “MANU” is not lit in the display, press and  
hold the [BND] button for 1 second or longer.  
MANU” is lit in the display and manual tuning  
is now available.  
3. Press the [a] or [d] button to tune in the  
desired station.  
2. Tune into a station.  
Tuning  
Quick tuning:  
There are 3 types of tuning mode available, seek  
tuning, manual tuning and preset tuning.  
Press and hold the [a] or [d] button for 1  
second or longer to tune in a station.  
Step tuning:  
Seek tuning  
There are 2 types of seek tuning: DX SEEK and  
LOCAL SEEK.  
Press the [a] or [d] button to manually  
tune in a station.  
DX SEEK can automatically tune in to receiv-  
able broadcast stations; LOCAL SEEK can tune  
in to only broadcast stations with a good recep-  
tion sensitivity.  
Recalling a preset station  
A total of 24 preset positions (6-FM1, 6-FM2, 6-  
FM3, 6-AM) exists to store individual radio sta-  
tions in memory. Pressing the corresponding  
[DIRECT] button recalls the stored radio fre-  
quency automatically.  
1. Press the [BND] button and select the de-  
sired band (FM or AM (MW, LW)).  
2. Tune into a station.  
1. Press the [BND] button and select the de-  
If “MANU” is lit in the display, press and hold  
the [BND] button for 1 second or longer.  
MANU” in the display goes off and seek tun-  
ing is now available.  
sired band (FM or AM (MW/LW)).  
2. Press the corresponding [DIRECT] button to  
recall the stored station.  
Press and hold one of the [DIRECT] buttons  
for 2 seconds or longer to store that station  
into preset memory.  
If “TA” is lit in the display, TP stations are auto-  
matically sought.  
DX SEEK  
Press the [a] or [d] button to automatically  
Manual memory  
seek a station.  
1. Select the desired station with seek tuning,  
manual tuning or preset tuning.  
When the [d] button is pressed, the station is  
sought in the direction of higher frequencies; if  
the [a] button is pressed, the station is sought  
in the direction of lower frequencies.  
2. Press and hold one of the [DIRECT] buttons  
for 2 seconds or longer to store the current  
station into preset memory.  
When seek tuning starts, “DX SEEK” appears in  
the display.  
LOCAL SEEK  
If you press and hold the [a] or [d] button for  
1 second or longer, local seek tuning is carried  
out. Broadcast stations with good reception sen-  
sitivity are selected.  
When local seeking starts, “LO SEEK” appears in  
the display.  
DXZ938R  
17  
 
Radio Operations  
RDS Operations  
Auto store  
RDS (Radio Data System)  
This unit has a built-in RDS decoder system that  
supports broadcast stations transmitting RDS data.  
Auto store is a function for storing up to 6 sta-  
tions that are automatically tuned in sequentially.  
If 6 receivable stations cannot be received, a  
previously stored station remains unoverwritten  
at the memory position.  
This system can display the name of the broad-  
cast station being received (PS) and can auto-  
matically switch to the broadcast station with the  
best reception as you move long distances (AF  
switching).  
1. Press the [BND] button and select the de-  
sired band (FM or AM (MW/LW)).  
2. Press and hold the [P/A] button for 2 sec-  
onds or longer. The stations with good recep-  
tion are stored automatically to the preset  
channels.  
Also, if a traffic announcement or programme  
type is broadcast from an RDS station, no matter  
what mode you are in, this broadcast is received.  
Additionally, if EON information is received, this  
information enables automatic switching of other  
preset stations on the same network and inter-  
ruption of the station being received with traffic  
information from other stations (TP). This func-  
tion is not available in some areas.  
If auto store is performed in the FM bands, the  
stations are stored in FM3 even if FM1 or FM2  
was chosen for storing stations.  
Preset scan  
Preset scan receives the stations stored in pre-  
set memory in order. This function is useful  
when searching for a desired station in memory.  
When using the RDS function, always set the  
radio to FM mode.  
• AF  
• PS  
: Alternative Frequency  
1. Press the [P/A] button.  
: Programme Service Name  
2. When a desired station is tuned in, press the  
[P/A] button again to continue receiving that  
station.  
• PTY : Programme Type  
• EON : Enhanced Other Network  
• TP  
: Traffic Programme  
Note:  
RDS interrupt does not function during AM radio  
reception or in TV mode.  
• Be careful not to press and hold the [P/A] button  
for 2 seconds or longer, otherwise the auto store  
function is engaged and the unit starts storing  
stations.  
AF function  
The AF function switches to a different fre-  
quency on the same network in order to main-  
tain optimum reception.  
The factory default setting is “ON”.  
Switching OFF the AF function  
Press the [AF] button. “AF” in the display goes  
off and the AF function turns off.  
Switching ON the AF function  
Press the [AF] button. “AF” in the display lights  
and the AF function turns on.  
If the reception of the current broadcast station de-  
teriorates, “PI SEARCH” appears in the display and  
the radio searches for the same programme on  
another frequency.  
AF function between RDS and DAB  
When the same programme is broadcast by  
both RDS and DAB, and this function is ON, the  
unit switches to receiving the broadcast with the  
better reception automatically.  
This function only operates when the DAH913 or  
DAH9500z DAB unit, sold separately, is connected.  
This factory default setting is “ON”.  
18  
DXZ938R  
 
RDS Operations  
TA (Traffic Announcement)  
In the TA standby mode, when a traffic announce-  
ment broadcast starts, the traffic announcement  
broadcast is received as top priority regardless of  
the function mode so you can listen to it.Traffic  
programme (TP) automatic tuning is also possible.  
1. Press and hold the [TITLE] button for 1 sec-  
ond or longer to switch to the adjustment se-  
lection display.  
2. Press the [a] or [d] button to select “LINK  
ACT”.  
3. Turn the [ROTARY] knob clockwise for “ON”  
or counterclockwise for “OFF”.  
This function can only be used when “TP” is lit in  
the display. When “TP” is lit, this means that the  
RDS broadcast station being received has traffic  
announcement programmes.  
ON:  
AF switching between DAB and RDS enabled.  
OFF:  
Setting the TA standby mode  
AF switching between DAB and RDS disabled.  
If you press the [TA] button when only “TP” is lit in  
the display, TP” and “TA” light in the display and the  
unit is set into the TA standby mode until a traffic an-  
nouncement is broadcast.When a traffic announce-  
ment broadcast starts, “TRA INFO” appears in the  
display. If you press the [TA] button while a traffic an-  
nouncement broadcast is being received, the traffic  
announcement broadcast reception is cancelled and  
the unit goes into the TA standby mode.  
4. Press the [TITLE] button to return to the pre-  
vious mode.  
REG (Regional programme) function  
When the REG function is ON, the optimum re-  
gional station can be received. When this func-  
tion is OFF, if the regional station area switches  
as you drive, a regional station for that region is  
received.  
Cancelling the TA standby mode  
With “TP” and “TA” lit in the display, press the  
[TA] button. The “TA” in the display goes off and  
the TA standby mode is cancelled.  
The factory default setting is “OFF”.  
Notes:  
• This function is disabled when a national station  
such as BBC R2 is being received.  
• The REG function ON/OFF setting is valid when  
the AF function is ON.  
If “TP” is not lit, pressing the [TA] button searches  
for a TP station.  
Searching for a TP station  
When “TP” is not lit, if you press the [TA] button,  
TA” in the display lights and the unit automati-  
cally receives a TP station.  
Switching the REG function ON  
Press and hold the [AF] button for 1 second or  
longer.  
Note:  
REG” in the display lights and the REG function  
turns on.  
• If a TP station is not received, the unit continues the  
search operation. Pressing [TA] button again goes off  
TA” in the display and stops TP station searching.  
Switching the REG function OFF  
Press and hold the [AF] button for 1 second or  
longer.  
Auto store function for TP stations  
You can automatically store up to 6 TP stations into  
preset memory. If the number of TP that can be re-  
ceived is less than 6, broadcast stations already  
stored in memory are left without being overwritten.  
REG” in the display goes off and the REG func-  
tion turns off.  
Manually tuning a regional station  
in the same network  
1. This function is valid when the AF function is  
ON and the REG function is OFF.  
With “TA” lit in the display, press and hold the [P/A]  
button for 2 seconds or longer.The TP stations with  
the good reception sensitivity are stored into preset  
memory.  
Note:  
Even if you select FM1 or FM2, aTP station is stored  
into memory for FM3.  
• This function can be used when a regional broad-  
cast of the same network is received.  
2. Press any one of the [DIRECT] buttons to  
call out the regional station.  
3. If the reception condition of the called out  
station is bad, press the [DIRECT] button of  
the same number. The unit receives a local  
station on the same network.  
DXZ938R  
19  
 
RDS Operations  
cast moving up the frequencies; if you press  
the [a] button, it seeks moving down the  
frequencies.  
PTY  
This function enables you to listen to a broad-  
cast of the selected programme type when it  
starts even if the unit is on a function mode  
other than radio.  
If no station with the selected PTY broadcast  
can be received, the unit returns to the PTY  
select mode.  
Some countries do not yet have PTY broadcast.  
In the TA standby mode, a TP station has priority  
over a PTY broadcast station.  
PTY preset memory  
1. When you press the [PTY] button, the PTY  
select mode is turned on.  
Setting the PTY standby mode  
When you press the [PTY] button, “PTY” lights in  
the display and the PTY standby mode is turned  
on. When the selected PTY broadcast starts, the  
PTY item name appears in the display.  
2. Turn the [ROTARY] knob clockwise or coun-  
terclockwise to select the desired PTY.  
The 29 types of PTY below can be selected.  
Cancelling the PTY standby mode  
PTY item  
When you press and hold the [PTY] button for 1  
second or longer, “PTY” goes off in the display  
and PTY standby mode is cancelled.  
ENGLISH  
NEWS  
Contents  
News  
AFFAIRS  
INFO  
Today’s events  
Information  
Sports  
Cancelling a PTY interrupt broadcast  
Press the [PTY] button during the PTY interrupt  
broadcast, the PTY interrupt is cancelled and  
the unit returns to PTY standby mode.  
SPORT  
EDUCATE  
DRAMA  
Education  
Drama  
CULTURE  
SCIENCE  
VARIED  
Culture  
Selecting PTY  
1. When you press the [PTY] button, the unit  
goes into PTY select mode.  
Science  
Variety  
2. Press any one of the [DIRECT] buttons. Al-  
ternatively, turn the [ROTARY] knob clock-  
wise or counterclockwise to select the de-  
sired PTY.  
POP M  
Pop music  
Rock music  
Easy music  
Light music  
Classics  
ROCK M  
EASY M  
LIGHT M  
CLASSICS  
OTHER M  
WEATHER  
FINANCE  
CHILDREN  
SOCIAL  
Below are the factory default settings stored  
for the [DIRECT] buttons.  
Other music  
Weather  
Finance  
PTY item  
Contents  
News  
Preset  
number  
ENGLISH  
NEWS  
1
2
3
4
5
6
For children  
Social  
INFO  
Information  
Pop Music  
Sport  
POP M  
SPORT  
RELIGION  
PHONE IN  
TRAVEL  
LEISURE  
JAZZ  
Religion  
Phone in  
Travel  
CLASSICS Serious Classical Music  
EASY M Easy Listening Music  
Leisure  
3. The PTY select mode is cancelled automati-  
cally 7 seconds after a PTY is selected.  
Jazz  
COUNTRY  
NATION M  
OLDIES  
Country  
Nation music  
Oldies  
PTY seek  
1. When you press the [PTY] button, the PTY  
select mode is turned on.  
FOLK M  
DOCUMENT  
Folk music  
Documentaries  
2. Select PTY.  
3. Press the [a] or [d] button. If you press  
the [d] button, the unit seeks a PTY broad-  
20  
DXZ938R  
 
CD Operations  
RDS oprations  
3. If you press and hold any one of the [DIRECT]  
buttons for 2 seconds or longer, the selected  
PTY is stored into that preset channel memory.  
Loading a CD  
1. Press the [O] button. The DUAL ACTION  
opens.  
.
CAUTION  
Be careful not to get your fingers caught  
when opening and closing the DUAL AC-  
TION.  
Emergency broadcast  
If an emergency broadcast is received, all the  
function mode operations are stopped.  
ALARM” appears in the display and the emer-  
gency broadcast can be heard.  
2. Press the [CD EJECT] button.  
Cancelling an emergency broadcast  
3. Insert a CD into the centre of the insertion  
slot with the label side facing up. The CD  
plays automatically after loading.  
If you press the [AF] button, emergency broad-  
cast reception is cancelled.  
Notes:  
• Never insert foreign objects into the CD insertion  
slot.  
• If the CD is not inserted easily, there may be an-  
other CD in the mechanism or the unit may re-  
quire service.  
Switching the PTY display language  
You can select one of 4 languages (English,  
German, Swedish or French) for the PTY dis-  
played in the display.  
The factory default setting is “ENGLISH”.  
• Discs not bearing the  
or  
mark and  
1. Press and hold the [TITLE] button for 1 sec-  
ond or longer to switch to the adjustment se-  
lection display.  
CD-ROMs cannot be played by this unit.  
Loading 8 cm compact discs  
2. Press the [a] or [d] button and select  
LANGUAGE”.  
No adapter is required to play an 8 cm CD.  
Insert the 8 cm CD into the centre of the inser-  
tion slot.  
3. Press the [  
] button  
4. Turn the [ROTARY] knob clockwise or coun-  
4. After loading a CD, the DUAL ACTION  
closes automatically.  
terclockwise to select the desired language.  
5. Press the [  
] button  
Notes:  
6. Press the [TITLE] button to return to the pre-  
• Note that DUAL ACTION closes immediately after  
a CD is inserted into CD insertion slot.  
vious mode.  
• If no CD is loaded in the DUAL ACTION, it closes  
after 30 seconds.  
Volume setting of TA, emergency  
broadcast (ALARM) and PTY  
The volume for TA, ALARM and PTY interrupts  
can be set during TA, ALARM or PTY interrupt.  
Listening to a CD already inserted  
Press the [FNC] button to select the CD mode.  
Play starts automatically. If no CD is loaded in  
the unit, “NO DISC” appears in the display.  
The factory default setting is “15”.  
During a TA, ALARM or PTY interrupt, turn the  
[ROTARY] knob clockwise or counterclockwise  
to set the volume to the desired level (0 to 33).  
Pausing play  
1. Press the [  
] button to pause play.  
When the TA, ALARM or PTY interrupt ends, the  
volume returns to the level it had before the inter-  
rupt.  
PAUSE” appears in the display.  
2. To resume CD play, press the [  
again.  
] button  
DXZ938R  
21  
 
CD Operations  
Top function  
The top function resets the CD player to the first  
track of the disc. Press the [BND] button to play  
the first track (track No. 1) on the disc.  
Ejecting a CD  
1. Press the [O] button. The DUAL ACTION  
opens. Press the [CD EJECT] button to eject  
a CD. “EJECT” appears in the display.  
CAUTION  
Scan play  
Be careful not to get your fingers caught  
when opening and closing the DUAL AC-  
TION.  
The scan play locates and plays the first 10 sec-  
onds of each track on a disc automatically. This  
function continues on the disc until it is cancelled.  
2. Remove the CD and press the [Q] button to  
The scan play is useful when you want to select a  
desired track.  
close the DUAL ACTION.  
Notes:  
1. Press the [P/A] button to start scan play.SCN”  
• Be sure to close the DUAL ACTION after remov-  
ing the CD.  
• The DUAL ACTION closes automatically 30 sec-  
onds after removing the CD.  
• If a CD (12 cm) is left in the ejected position for  
15 seconds, the CD is automatically reloaded.  
(Auto reload)  
lights in the display.  
2. To cancel the scan play, press the [P/A] but-  
ton again. SCN” goes off from the display  
and the current track continues to play.  
Repeat play  
• 8 cm CDs are not auto reloaded. Be sure to re-  
move it when ejected.  
• If you force a CD into before auto reloading, this  
can damage the CD.  
• When it fails in eject operation when the eject but-  
ton is pressed down, fully press the eject button  
down again. (If the eject button operation is in-  
complete, it means that the Dual Action Mecha-  
nism is suspended, so do not perform other fur-  
ther operation without releasing the Dual Action  
Mechanism stopped midway.)  
The repeat play continuously plays the current  
track. This function continues automatically until  
it is cancelled.  
1. Press the [AF] button. “RPT” lights in the dis-  
play and the current track is repeated.  
2. To cancel the repeat play, press the [AF] but-  
ton again.RPT” goes off from the display and  
normal play resumes.  
Random play  
The random play selects and plays individual tracks  
on a disc in no particular order. This function con-  
tinues automatically until it is cancelled.  
Selecting a track  
Track-up  
1. Press the [d] button to move ahead to the  
1. Press the [PTY] button. “RDM” lights in the  
display, an individual track is selected ran-  
domly and play begins.  
beginning of the next track.  
2. Each time you press the [d] button, the  
track advances ahead to the beginning of the  
next track.  
2. To cancel the random play, press the [PTY]  
button again.RDM” goes off and normal play  
resumes.  
Track-down  
1. Press the [a] button to move back to the  
beginning of the current track.  
2. Press the [a] button twice to move to the  
beginning of the previous track.  
Fast-forward/fast-backward  
Fast-forward  
Press and hold the [d] button for 1 second or  
longer.  
Fast-backward  
Press and hold the [a] button for 1 second or  
longer.  
22  
DXZ938R  
 
Operations Common to Each Mode  
3. Press one of the [DIRECT] buttons to select  
Entering titles-DISC or STATION  
TITLE  
Titles up to 10 characters long can be stored in  
memory and displayed for CD, CD changer and  
TV stations. The number of titles that can be en-  
tered for each mode are as follows.  
the use memory to which you want to give a  
title.  
4. Press the [TITLE] button.  
5. Press the [a] or [d] button to move the  
cursor.  
6. Press the [DISP] button to select the charac-  
ter. Each time you press the [DISP] button,  
the character changes in the following order:  
Capital letters Small letters Numbers  
and Symbols Umlaut Capital letter…  
Mode  
Number of titles  
50 titles  
CD mode  
TV mode  
15 titles  
CD changer mode  
CDC655z connected  
CDC655Tz connected  
CDC1255z connected  
Number of titles  
60 titles  
7. Turn the [ROTARY] knob clockwise or coun-  
terclockwise to adjust desired character.  
100 titles  
8. Repeat steps 5 to 7 to enter up to 10 charac-  
ters for the title.  
50 titles  
1. Press the [FNC] button to select the mode you  
9. Press and hold the the [  
] button for 2  
want to enter a title (CD, CD changer or TV).  
second or longer to store the title into  
memory and cancel title input mode.  
2. Select and play a CD in the CD changer or  
tune in to a TV station for which you want to  
enter the title.  
Clearing titles  
3. Press the [DISP] button and display the  
1. Select and play a CD in the CD changer or  
tune in to a TV station for which you want to  
clear the title.  
main.  
4. Press the [TITLE] button. “TITL” appears in  
the display and the cursor position flashes.  
2. Press the [DISP] button and display the  
5. Press the [a] or [d] button to move the  
main.  
cursor.  
3. Press the [TITLE] button.TITL” appears in  
the display and the display switches to the  
title input display.  
6. Press the [DISP] button to select a character.  
Each time you press the [DISP] button, the  
character changes in the following order:  
4. Press the [BND] button.  
Capital letters Small letters Numbers  
and Symbols Umlaut Capital letters...  
5. Press and hold the [  
] button for 1 sec-  
ond or longer to clear the title and cancel title  
input mode.  
7. Turn the [ROTARY] knob to select the de-  
sired character. Turning the [ROTARY] knob  
clockwise moves the cursor to the next char-  
acter; turning it counterclockwise moves the  
cursor to the previous character.  
Dimmer Level  
1. Press the [TITLE] button for 1 second or  
longer to enter ADJ mode.  
8. Repeat steps 5 to 7 to enter up to 10 charac-  
ters for the title.  
2. Press the [a] or [d] button to select the  
DIMMER LV”.  
9. Press and hold the [  
] button for 2 sec-  
3. Turn the [ROTARY] knob clockwise or coun-  
onds or longer to store the title into memory  
and cancel title input mode.  
terclockwise to adjust Dimmer level.  
4. Press the [TITLE] button to return to the pre-  
vious mode.  
Entering titles-Adjusted Effect  
items title  
You can give a title to the user memory of the  
AC-PII VSE POSITION and P.EQ that you have  
adjusted.  
Adjustment range is off to LV5.  
Factory default setting is LV3.  
Contrast  
1. Press the [TITLE] button for 1 second or  
longer to enter ADJ mode.  
1. Select the adjustment mode in which you  
want to give a title.  
2. Press the [a] or [d] button to select the  
CONTRAST”.  
2. Press the [BND] button to select the user  
preset side.  
DXZ938R  
23  
 
Operations Common to Each Mode  
Selecting AUX IN sensitivity  
Make the following settings to select the sensi-  
tivity when sounds from external devices con-  
nected to this unit are difficult to hear even after  
adjusting the volume.  
3. Turn the [ROTARY] knob clockwise or coun-  
terclockwise to adjust Contrast level.  
4. Press the [TITLE] button to return to the pre-  
vious mode.  
Adjustment range is LV1 to LV18  
Factory default setting is LV18.  
The factory default setting is “SENS LOW”.  
1. Press and hold the [TITLE] button for 1 sec-  
ond or longer to switch to the adjustment se-  
lection display.  
Key Illumi  
1. Press the [TITLE] button for 1 second or  
longer to enter ADJ mode.  
2. Press the [a] or [d] button and select  
AUX SENS”.  
2. Press the [a] or [d] button to select the  
KEY ILLUMI”.  
3. Turn the [ROTARY] knob clockwise or coun-  
terclockwise as needed and select from  
3. Turn the [ROTARY] knob clockwise or coun-  
SENS HIGH”, “SENS MID” or “SENS LOW”.  
terclockwise to select Key illumi color.  
4. Press the [TITLE] button to return to the pre-  
4. Press the [TITLE] button to return to the pre-  
vious mode.  
vious mode.  
Selectable color is Green or Red.  
Factory default setting is Red.  
Screen saver function  
This unit is provided with the screen saver func-  
tion which allows you to show various kinds of  
patterns and characters in the Operation Status  
indication area of the display.You can turn on  
and off this function.  
Message display  
When the unit is powered on or off, a message  
is displayed. The user can turn this message  
display ON or OFF.  
If the button operation is performed with the  
screen saver function on, the operation display  
corresponding to the button operation is shown  
for about 30 seconds and the display returns to  
the screen saver display.  
The factory default setting is “ON”.  
1. Press and hold the [TITLE] button for 1 sec-  
ond or longer to switch to the adjustment se-  
lection display.  
The factory default setting is “RANDOM”.  
2. Press the [a] or [d] button to select “MES-  
SAGE”.  
1. Press the [TITLE] button for 1 second or  
longer to enter ADJ mode.  
3. Turn the [ROTARY] knob clockwise or coun-  
terclockwise to set the message display ON  
or OFF.  
2. Press the [a] or [d] button to select the  
AUTO SS”.  
4. Press the [TITLE] button to return to the pre-  
3. Press [  
mode.  
] to enter the AUTO SS ADJ  
vious mode.  
4. Turn the [ROTARY] knob clockwise or coun-  
terclockwise to select AUTO SS type or  
AUTO SS off.  
Beep  
1. Press the [TITLE] button for 1 second or  
longer to enter ADJ mode.  
5. Press the [TITLE] button to return to the pre-  
vious mode.  
2. Press the [a] or [d] button to select the  
BEEP”.  
SS type are SS OFF, SS PTN1, SS PTN2,  
SS PTN3, SS RANDOM  
3. Turn the [ROTARY] knob clockwise or coun-  
terclockwise to switch Beep on or Beep off.  
Displaying titles  
This unit can display title data and user title data  
input with this unit.  
4. Press the [TITLE] button to return to the pre-  
vious mode.  
Factory default setting is Beep off.  
1. Press the [DISP] button to display the title.  
2. Each time you press and hold the [DISP] but-  
ton for 1 second or longer, the title display  
changes.  
AUX function  
This system has an external RCA input so you  
can listen to sounds and music from external  
devices connected to this unit.  
24  
DXZ938R  
 
Operations Common to Each Mode  
Note:  
2. Press the [a] or [d] button and select  
AUX/TEL”.  
The contents of the title to be displayed depend on  
a disc to be played.  
If a disc with no title or user title input is played,  
NO-TITLE “ appears in the display.  
3. Turn the [ROTARY] knob clockwise or coun-  
terclockwise as needed and select from  
AUXor “TEL”.  
AUX :  
Setting the method for Ttitle scroll  
Set how to scroll in CD-TEXT or MD.  
The factory default setting is “ON”.  
AUX/TEL input cable is for external Audio input.  
TEL :  
AUX/TEL input cable is for cellular phone au-  
dio input.  
1. Press and hold the [TITLE] button for 1 sec-  
ond or longer to switch to the adjustment se-  
lection display.  
4. Press the [TITLE] button to return to the pre-  
vious mode.  
2. Press the [a] or [d] button and select  
AUTO SCROLL.  
Setting the car speaker output for  
the cellular phone  
The factory default setting is “RIGHT”.  
3. Turn the [ROTARY] knob clockwise or coun-  
terclockwise and select “ON” or “OFF”.  
ON:  
To output the telephone calls, set the cellular phone  
interrupt to ON.  
To scroll automatically.  
OFF:  
1. Press and hold the [TITLE] button for 1 sec-  
ond or longer to switch to the adjustment se-  
lection display.  
To scroll just 1 time when the title was  
changed or the title key was pressed.  
4. Press the [TITLE] button to return to the pre-  
2. Press the [a] or [d] button to select “TEL-  
SP”.  
vious mode.  
3. Turn the [ROTARY] knob clockwise to select  
RIGHT” or counterclockwise to select  
LEFT”.  
Anti-theft indicator  
The red Anti-theft indicator is a function for pre-  
venting theft. When the DCP is removed from  
the unit, this indicator blinks.  
RIGHT:  
Telephone calls can be heard on the front  
right speaker connected to this unit.  
The factory default setting is “OFF”.  
1. Press and hold the [TITLE] button for 1 sec-  
ond or longer to switch to the adjustment se-  
lection display.  
LEFT:  
Telephone calls can be heard on the front left  
speaker connected to this unit.  
2. Press the [a] or [d] button and select  
BLINK LED”.  
4. Press the [TITLE] button to return to the pre-  
vious mode.  
3. Turn the [ROTARY] knob clockwise to set this  
function “ON” or turn it counterclockwise to  
switch this function “OFF”.  
Cellular phone interrupt setting  
If you connect this unit and your cellular phone  
with a separately sold cable, you can listen to  
your telephone calls on your car speakers.  
4. Press the [TITLE] button to return to the pre-  
vious mode.  
The factory default setting is “OF”.  
Selecting AUX/TEL  
You can listen to sounds and music from exter-  
nal devices or your telephone calls from the  
speakers when connected to this unit.  
1. Press and hold the [TITLE] button for 1 sec-  
ond or longer to switch to the adjustment se-  
lection display.  
2. Press the [a] or [d] button to select “TEL-  
SWITCH”.  
When TEL INT or External device is connected to  
this unit, you can select TEL mode or AUX mode.  
3. Turn the [ROTARY] knob clockwise or coun-  
terclockwise to select the setting. Each time  
you turn the [ROTARY] knob, the setting  
changes in the following order:  
The factory default setting is “AUX”.  
1. Press and hold the [TITLE] button for 1 sec-  
ond or longer to switch to the adjustment se-  
lection display.  
DXZ938R  
25  
 
Operations Common to Each Mode  
OFF ON MUTE OFF...  
OFF:  
Setting Auto Volume sensitivity  
1. Press and hold the “TITLE” button for 1 sec-  
ond or longer and enter “ADJ” mode  
This unit continues normal operation even  
when the cellular phone is used.  
2. Press the [a] or [d] button to select the  
A-VOL SENS”  
Note:  
• If conncting a hands-free kit, please ensure the  
setting is ON to receive the telephone audio  
through the system.  
3. Turn the “ROTARY” knob clockwise or coun-  
terclockwise to make the adjustment.  
The adjustment steps are below 6 steps, Off  
Low M-L Mid M-H High.  
ON:  
You can listen to your telephone calls from  
the speakers connected to this unit.  
When listening to your calls on your car  
speakers, you can adjust the volume by turn-  
ing the [ROTARY] knob.  
MUTE:  
The sound from this unit is muted during  
telephone calls.  
4. Press the [TITLE] button to return to the pre-  
vious mode.  
Setting Auto Volume  
1. Press and hold the “TITLE” button for 1 sec-  
ond or longer and enter “ADJ” mode  
2. Press the [a] or [d] button to select  
the”CALIBRATE”  
3. Press the “PLAY/PAUSE” button and  
START” is displayed.  
4. Keep driving speed 50km/h and press the  
PLAY/PAUSE” button.  
5. “CALIBRATION” is flush for 2seconds in dis-  
play.  
6. If calibration is successful display indicate  
SUCCESSFUL” and sound long beep, or if  
calibration is not successful display indicate  
FAILED” and sound 2 times a short beep.  
7. If you failed, repeat steps 3 to 6.  
Note:  
• When installing this device or transferring it into  
another vehicle, for the sake of safety, always  
have this work done by the store of purchase or  
your nearest Clarion dealer. Installation requires  
specialized techniques and experience.  
26  
DXZ938R  
 
7. OPERATIONS OF ACCESSORIES  
CD/MD/DVD Changer Operations  
Track-down  
CD/MD/DVD changer functions  
1. Press the [a] button to move back to the  
When an optional CD/MD/DVD changer is con-  
beginning of the current track.  
nected through the CeNET cable, this unit con-  
trols all CD/MD/DVD changer functions. This unit  
can control a total of 2 changers (CD/MD/DVD).  
2. Press the [a] button twice to move to the  
beginning of the previous track.  
Press the [FNC] button and select the CD/MD/  
DVD changer mode to start play. If 2 changers  
are connected, press the [FNC] button to select  
the CD/MD/DVD changer for play.  
Fast-forward/fast-backward  
Fast-forward  
Press and hold the [d] button for 1 second or  
If “NO MAGAZINE” appears in the display, insert  
the magazine into the changer.LOADING” appears  
in the display while the player loads (checks) the  
magazine.  
longer.  
Fast-backward  
Press and hold the [a] button for 1 second or  
If “NO DISC” appears in the display, eject the maga-  
zine and insert discs into each slot. Then, reinsert  
the magazine back into the changer.  
longer.  
Top function  
The top function plays from the first track of the  
disc.  
CAUTION  
CD-ROM discs and CD-R discs cannot be  
played in the CD changer.  
When playing a disc 1 to 6  
Press the [DIRECT] button (1 to 6) with the  
same number as the CD playing.  
Pausing play  
1. Press the [  
] button to pause play.  
When playing a disc 7 to 12 (only when a  
12 disc CD changer is used.)  
PAUSE” appears in the display.  
2. To resume play, press the [  
] button again.  
Press and hold for 1 second or longer the [DI-  
RECT] button (1 to 6) with the same number as  
the CD playing.  
Selecting a DISC  
Each [DIRECT] button corresponds to a disc  
loaded into the magazine.  
If a CD is not loaded in a slot of magazine, pressing  
the [DIRECT] button corresponding to its disc num-  
ber is invalid.  
Selecting a disc from 1 to 6  
Press the corresponding [DIRECT] button (1 to  
6) to select the desired disc.  
Scan play  
Scan play locates and plays the first 10 seconds  
of each track on a disc automatically. This func-  
tion continues on the disc until it is cancelled.  
Selecting a disc from 7 to 12 (only when a  
12 disc CD changer is used.)  
Press and hold the [DIRECT] button (1 to 6) for  
1 second or longer to select the desired disc.  
The scan play is useful when you want to select a  
desired track.  
If a CD is not loaded in a slot of magazine, pressing  
the [DIRECT] button corresponding to its disc num-  
ber is invalid.  
1. Press the [P/A] button to start track scan-  
ning. “SCN” lights in the display.  
2. To cancel the scan play, press the [P/A] but-  
ton again. “SCN” goes off from the display  
and the current track continues to play.  
Selecting a track  
Track-up  
1. Press the [d] button to move ahead to the  
beginning of the next track.  
2. Each time you press the [d] button, the  
track advances ahead to the beginning of the  
next track.  
DXZ938R  
27  
 
CD/MD/DVD Changer Operations  
Disc scan play  
Disc random play  
Disc scan play locates and plays the first 10  
seconds of the first track on each disc in the cur-  
rently selected CD (MD) changer. This function  
continues automatically until it is cancelled.  
The disc random play selects and plays indi-  
vidual tracks or discs automatically in no par-  
ticular order. This function continues automati-  
cally until it is cancelled.  
Disc scan play is useful when you want to select a  
desired CD (MD).  
1. Press and hold the [PTY] button for 1 second  
or longer. “DISC” and “RDM” light in the dis-  
play and disc random play starts.  
1. Press and hold the [P/A] button for 1 second  
or longer. “DISC” and “SCN” light in the dis-  
play and disc scan play starts.  
2. To cancel disc random play, press and hold  
the [PTY] button again. “DISC” and “RDM” go  
off from the display and normal play resumes  
from the current track.  
2. To cancel disc scan play, press the [P/A] but-  
ton again. “DISC” and “SCN” go off from the  
display and the current track continues to  
play.  
Repeat play  
Repeat play continuously plays the current track.  
This function continues automatically until it is  
cancelled.  
1. Press the [AF] button. “RPT” lights in the dis-  
play and the current track is repeated.  
2. To cancel repeat play, press the [AF] button  
again. “RPT” goes off from the display and  
normal play resumes.  
Disc repeat play  
After all the tracks on the current disc have been  
played, disc repeat play automatically replays  
the current disc over from the first track. This  
function continues automatically until it is can-  
celled.  
1. Press and hold the [AF] button for 1 second  
or longer. “DISC” and “RPT” light in the dis-  
play and disc repeat play starts.  
2. To cancel disc repeat play, press and hold  
the [AF] button again. “DISC” and “RPT” go  
off from the display and normal play resumes  
on the current track.  
Random play  
Random play selects and plays individual tracks  
on the disc in no particular order. This function  
continues automatically until it is cancelled.  
1. Press the [PTY] button. “RDM” lights in the  
display and random play begins.  
2. To cancel random play, press the [PTY] but-  
ton again. “RDM” goes off from the display  
and normal play resumes.  
28  
DXZ938R  
 
TV Operations  
1. Press the [BND] button and select the de-  
TV tuner functions  
sired band (TV1 or TV2).  
When an optional TV tuner is connected through  
the CeNET cable, this unit controls all TV tuner  
functions. To watch TV requires a TV tuner and  
monitor.  
If “MANU” is not lit in the display, press and  
hold the [BND] button for 1 second or longer.  
MANU” lights in the display and manual tun-  
ing is now available.  
2. Tune into a station.  
Watching aTV  
Quick tuning:  
1. Press the [FNC] button and select the TV  
Press and hold the [a] or [d] button for 1  
mode.  
second or longer to tune in a station.  
2. Press the [BND] button to select the desired  
TV band (TV1 or TV2). Each time the button  
is pressed, the input selection toggles be-  
tween TV1 and TV2.  
Step tuning:  
Press the [a] or [d] button to manually  
tune in a station.  
3. Press the [a] or [d] button to tune in the  
desired TV station.  
Recalling a preset station  
A total of 12 TV stations can be stored (6-TV1  
and 6-TV2). This allows you to select your favor-  
ite TV stations and store them in memory for  
later recall.  
Watching a video  
The TV tuner has a VTR input terminal to which  
1 external device can be connected. Connect a  
12 V video cassette player (VCP) or video cas-  
sette recorder (VCR) to the TV tuner input termi-  
nal.  
1. Press the [BND] button and select the de-  
sired TV band (TV1 or TV2).  
2. To recall a stored TV station, press the de-  
sired [DIRECT] button to select that station.  
1. Press the [PTY] button to select VTR.  
Press and hold one of the [DIRECT] buttons  
for 2 seconds or longer to store the current  
station into preset memory.  
2. To return to the TV broadcast, press the  
[PTY] button.  
Tuning  
Manual memory  
1. Select the desired station with seek tuning,  
manual tuning or preset tuning.  
There are 3 types of tuning mode available,  
Seek tuning, manual tuning and preset tuning.  
2. Press and hold one of [DIRECT] buttons for  
2 seconds or longer to store the current sta-  
tion into preset memory.  
Seek tuning  
1. Press the [BND] button and select the de-  
sired TV band (TV1 or TV2).  
If “MANU” is lit in the display, press and hold  
the [BND] button for 1 second or longer.  
MANU” in the display goes off and seek tun-  
ing is now available.  
Auto store  
Auto store selects 6 TV stations automatically  
and stores each one into preset memory.  
If there are not 6 stations with good reception,  
stations previously stored in memory remain  
and only the strong stations are stored into  
memory.  
2. Press the [a] or [d] button to automatically  
seek a station. Press the [d] button to auto-  
matically tune up the frequency band to the  
next available TV station; press the [a] but-  
ton to automatically tune down.  
1. Press the [BND] button and select the de-  
sired TV band (TV1 or TV2).  
Manual tuning  
There are 2 ways available: Quick tuning and  
step tuning.  
When you are in the step tuning mode, the fre-  
quency changes one step at a time. In the quick  
tuning mode, you can quickly tune the desired  
frequency.  
DXZ938R  
29  
 
TV Operations  
Digital Radio / DAB Operations  
DAB control function  
2. Press and hold the [P/A] button for 2 sec-  
onds or longer. The stations with good recep-  
tion are stored automatically to the preset  
channels.  
When a CeNET cable is used to connect a DAB  
(DAH913 or DAH9500z) (sold separetely), all  
functions can be operated.  
Preset scan  
Listening to the DAB station  
1. Press the [FNC] button to select the DAB  
mode.  
Preset scan allows the user to view each preset  
position before it automatically advances to the  
next preset. This function is useful for searching  
for a desired TV station in memory.  
2. When the unit receives a DAB station, the  
display changes in the following order:  
1. Press the [P/A] button.  
Frequency channel service label  
2. When the desired station is found, press the  
[P/A] button again to remain tuned to that  
station.  
Switching displays  
Press the [DISP] button for 1 second during the  
Main (service label) display to select Main (ser-  
vice label) or Sub (PTY).  
Note:  
• Do not press and hold the [P/A] button for 2 sec-  
onds or longer. Doing so will trigger the auto store  
function and start storing stations into memory.  
Notes:  
• The display shown in the normal reception mode  
and the preset reception mode is the same when  
a DAB station is received.  
• The number of programmes and broadcasting  
times depend on the DAB stations.  
Setting the TV area  
When you select the TV area (TV reception  
area), the TV tuner area setting changes.  
1. Press and hold the [TITLE] button for 1 sec-  
ond or longer to switch to the adjustment se-  
lection display.  
• When the strength of DAB signals is weak, audio  
output is muted.  
2. Press the [a] or [d] button to select “TV  
AREA”.  
Seek tuning  
1. Press the [FNC] button to select the DAB mode.  
3. Press the [  
] button.  
2. Press and hold the [a] or [d] button for 1  
second or longer.  
4. Turn the [ROTARY] knob clockwise or coun-  
terclockwise to select the reception area.  
SEARCHING” appears in the display.  
5. Press the [  
] button.  
3. “DAB” lights up in the display when the main  
6. Press the [TITLE] button to return to the pre-  
unit receives a DAB station.  
vious mode.  
* The main unit stops the seek tuning when it  
cannot find a DAB station. The display returns  
to the previous mode.  
Setting the TV diver  
You can change the reception setting for the TV  
antenna connected to the TV tuner.  
Manual tuning  
1. Press and hold the [TITLE] button for 1 second or  
1. Press the [FNC] button to select the DAB mode.  
longer to switch to the adjustment selection display.  
2. Press and hold the [BND] button for 1 second  
or longer. “MANU” lights up in the display.  
2. Press the [a] or [d] button to select “TV  
DIVER”.  
3. Press the [a] or [d] button to select a sta-  
3. Turn the [ROTARY] knob clockwise to set to  
ON” or counterclockwise to set to “OFF”.  
tion.  
If no operation is performed for more than 7  
seconds, manual tuning is cancelled and the  
display returns to the previous mode.  
ON:  
Sets reception emphasizing the visual.  
OFF:  
Sets the diver setting to OFF.  
4. Press the [TITLE] button to return to the pre-  
vious mode.  
30  
DXZ938R  
 
Digital Radio / DAB Operations  
Switching programmes  
1. Press the [FNC] button to receive a DAB station.  
3. Press one of the [DIRECT] buttons to recall a  
preset programme.  
Note:  
2. Press the [a] or [d] button to switch  
• Press and hold the [DIRECT] button for 2 sec-  
onds or longer to store the programme currently  
being received. (Manual memory)  
programmes in the DAB station.  
Note:  
• The programme name may be the same depend-  
ing on DAB programmes.  
AF function  
The AF function switches to a different fre-  
quency on the same network in order to main-  
tain optimum reception.  
Programme scan  
This function scans through each receivable  
programme in a DAB station being received for  
10 seconds sequentially. This is useful when you  
want to search for a desired programme.  
The factory default setting is “ON”  
If the reception of the current broadcast station de-  
teriorates, “SEARCH” appears in the display and  
the radio searches for the same programme on  
another frequency.  
1. Press the [FNC] button to receive a DAB station.  
2. Perform the following operation depending  
on the connected model.  
For details on “AF function”, refer to the section  
RDS operation” of each owner’s manual.  
Press the [P/A] button. “SERVICE SCN”  
lights up and the unit starts scanning each  
programme for 10 seconds sequentially.  
Each time the main unit scans, the  
Switching OFF the AF function  
Switching ON the AF function  
AF function between RDS and DAB  
programme name is shown in the display.  
When the same programme is broadcast by  
both RDS and DAB, and this function is ON, the  
main unit switches to receiving the broadcast  
with the better reception automatically.  
3. To stop programme scan when a desired  
programme is tuned in.  
Press the [P/A] button.  
Manual memory  
TA (Traffic Announcement)  
The main unit has a manual memory function for  
DAB programmes. Up to 18 programmes (6  
programmes each) can be preset in the preset  
buttons.  
In the TA standby mode, when a traffic announce-  
ment broadcast starts, the traffic announcement  
broadcast is received as top priority regardless of  
the function mode. Traffic programme (TP) auto-  
matic tuning is also possible.  
[M1], [M2] and [M3]  
1. Press the [FNC] button to select the DAB  
This function can only be used when “TP” is lit in  
the display. When “TP” is lit, this means that the  
DAB or RDS broadcast station being received has  
traffic announcement programmes.  
mode.  
2. Press the [BND] button to select any one  
shown above.  
For details on “TA”, refer to the section “RDS op-  
eration” of each owner’s manual.  
3. Press the [a] or [d] button to select a de-  
sired programme.  
Setting the TA standby mode  
Cancelling the TA standby mode  
Searching for a TP station  
Notes:  
4. Press and hold one of the [DIRECT] buttons  
(1 to 6) for 2 seconds or longer to store the  
programme.  
Note:  
• If a TP station is not received, the main unit stops  
the search operation.  
• The interrupt programme (PTY or INFO) cannot  
be written into a manual memory.  
• “TP” may be lit in the display when a TP broad-  
cast is transmitted from an RDS station. In this  
case, press the [TA] button to perform TP seek  
tuning. Press the [TA] button again to return to the  
previous mode.  
Recalling a preset programme  
1. Press the [FNC] button to select the DAB mode.  
2. Press the [BND] button. Each time you press  
the [BND] button, the display changes in the  
following order:  
[M1] [M2] [M3] [M1]...  
DXZ938R  
31  
 
Digital Radio / DAB Operations  
INFO (Announcement)  
Turn the [ROTARY] knob clockwise or  
counterclock wise to set the information item  
for ON or OFF.  
In the INFO standby mode, when the selected  
announcement programme starts, the main unit  
switches to the selected announcement  
programme automatically.  
5. Press the [TITLE] button to return to the pre-  
vious display.  
Setting the INFO standby mode  
If you press and hold the [TA] button for 1 sec-  
ond or longer, “INFO” lights in the display and  
the main unit is set into the INFO standby mode  
until the selected announcement is broadcast.  
When the selected announcement broadcast  
starts, the announcement item appears in the  
display. If you press and hold the [TA] button for  
1 second or longer while the selected an-  
nouncement broadcast is being received, the  
selected announcement broadcast reception is  
cancelled and the main unit goes into the INFO  
standby mode.  
PTY  
This function enables you to listen to the se-  
lected programme type, irrespective of the func-  
tion mode.  
One common PTY can be selected for DAB or RDS.  
Of DAB PTY and RDS PTY, the PTY which is re-  
ceived earlier takes priority over the other.  
PTY broadcasts are not yet available in all coun-  
tries.  
In the INFO standby mode, INFO stations have pri-  
ority over PTY stations.  
In the TA standby mode, TP stations have priority  
over PTY stations.  
Cancelling INFO standby mode  
To cancel the INFO standby mode, press and  
hold the [TA] button for 1 second or longer.  
For details on “PTY”, refer to the section “RDS op-  
eration” of each owner’s manual.  
Information select  
Setting the PTY standby mode  
Cancelling the PTY standby mode  
Cancelling a PTY interrupt broadcast  
Selecting PTY  
This is a function for selecting INFORMATION  
ON or OFF in the Information interrupt mode.  
You can set ON up to 6 information items.  
You can select any of the 6 items below:  
PTY seek  
INFORMATION item  
PTY preset memory  
ENGLISH  
TRAVEL  
WARNING  
NEWS  
Contents  
Transport flash  
Warning / Service  
News flash  
Emergency broadcast  
When an emergency broadcast is received, all  
the function mode operations are stopped.  
ALARM” appears in the display and the emer-  
gency broadcast can be heard.  
WEATHER  
EVENT  
Area weather flash  
Event announcement  
Special event  
For details on “Emergency broadcast”, refer to the  
section “RDS operation” of each owner’s manual.  
SPECIAL  
Cancelling an emergency broadcast  
1. Perform the following operation depending  
on the connected model.  
Press and hold the [TITLE] button for 1 second or  
longer.  
Switching the PTY and INFO display  
language  
You can select one of 4 languages (English,  
German, Swedish or French) for the PTY and  
INFO shown in the display.  
2. Press the [a] or [d] button to select “INFO  
SEL”, then press the [  
INFO SEL” mode.  
] button to enter  
3. Press the [a] or [d] button to select an in-  
The factory default setting is “ENGLISH”.  
formation item.You can select any of 6 items:  
For details on “Switching the PTY and INFO dis-  
play language”, refer to the section “RDS opera-  
tion” of each owner’s manual.  
TRAVEL WARNING NEWS ➜  
WEATHER EVENT SPECIAL ➜  
TRAVEL ...  
4. Perform the following operation depending  
on the connected model.  
32  
DXZ938R  
 
DVD DECK Operations  
Digital Radio / DAB Operations  
Volume setting of TA, INFO,  
emergency broadcast (ALARM) and  
Operation  
Play/Still operation  
Press the [  
mode (play, still (pause)).  
] button to select the desired  
PTY  
The volume for TA, INFO, ALARM and PTY in-  
terrupts can be set during TA, INFO, ALARM  
and PTY interrupt. Perform the following opera-  
tion depending on the connected model.  
Each time the button is pressed, the mode  
changes cyclically.  
Chapter up/down operation (FF/FB opera-  
tion)  
The factory default setting is “15”.  
During a TA, INFO, ALARM or PTY interrupt,  
turn the [ROTARY] knob clockwise or counter-  
clockwise to set the volume to a desired level (0  
to 33).  
Press the [d] button for 1 second or shorter to  
increment chapters.  
Hold down the [d] button for 1 second or longer  
to fast forward.  
When theTA, INFO, ALARM or PTY interrupt ends,  
the volume returns to the level it had before the in-  
terrupt.  
Press the [a] button for 1 second or shorter to  
decrement chapters.  
Hold down the [a] button for 1 second or longer  
to fast backward.  
DXZ938R  
33  
 
8. IN CASE OF DIFFICULTY  
Problem  
Cause  
Measure  
Power does not turn  
on.  
(No sound is pro-  
duced.)  
Fuse is blown.  
Replace with a fuse of the same amperage. If  
the fuse blows again, consult your store of pur-  
chase.  
Incorrect wiring.  
Consult your store of purchase.  
No sound output  
Power antenna lead is shor- 1. Turn the unit off.  
ted to ground or excessive  
when operating the  
2. Remove all wires attached to the power anten-  
unit with amplifiers or current is required for  
power antenna  
attached.  
na lead. Check each wire for a possible short  
to ground using an ohm meter.  
remote-on the amplifiers or  
power antenna.  
3. Turn the unit back on.  
4. Reconnect each amplifier remote wire to the  
power antenna lead one by one. If the amplifi-  
ers turn off before all wires are attached, use  
an external relay to provide remote-on voltage  
(excessive current required).  
Nothing happens  
when buttons are  
pressed.  
The microprocessor has  
Turn off the power, then  
Reset button  
malfunctioned due to noise, press the [RELEASE]  
etc.  
button and remove the  
DCP.  
Press the reset button  
with a thin rod.  
Display is not accu-  
rate.  
DCP or main unit connec-  
tors are dirty.  
Wipe the dirt off with a soft cloth moistened with  
cleaning alcohol.  
Compact disc cannot Another compact disc is  
be loaded. already loaded.  
Eject the compact disc before loading the new  
one.  
Sound skips or is noi- Compact disc is dirty.  
Clean the compact disc with a soft cloth.  
sy.  
Compact disc is heavily  
scratched or warped.  
Replace with a compact disc with no scratches.  
Sound is bad directly Water droplets may form on Let dry for about 1 hour with the power on.  
after power is turned the internal lens when the  
on.  
car is parked in a humid  
place.  
Poor sound quality  
The equalizer levels are too If the equalizer levels are too high, the sound  
high.  
may distort. Lower the equalizer levels.  
34  
DXZ938R  
 
9. ERROR DISPLAYS  
If an error occurs, one of the following displays is displayed.  
Take the measures described below to eliminate the problem.  
Error Display  
ERROR 2  
Cause  
Measure  
A CD is caught inside the CD deck and is  
not ejected.  
This is a failure of CD deck’s mechanism and  
consult your store of purchase.  
ERROR 3  
A CD cannot be played due to scratches,  
etc.  
Replace with a non-scratched,  
non-warped-disc.  
A CD cannot be played due to pick up fail-  
ure.  
Consult your store of purchase.  
ERROR 6  
ERROR 2  
ERROR 3  
A CD is loaded upside-down inside the CD  
deck and does not play.  
Eject the disc then reload it properly.  
A CD inside the CD changer is not loaded.  
This is a failure of CD changer’s mechanism  
and consult your store of purchase.  
A CD inside the CD changer cannot be  
played due to scratches, etc.  
Replace with a non-scratched, non-warped  
disc.  
A CD cannot be played due to pick up fail-  
ure.  
Consult your store of purchase.  
ERROR 6  
ERROR H  
A CD inside the CD changer cannot be  
played because it is loaded upside-down.  
Eject the disc then reload it properly.  
Displayed when the temperature in the MD  
changer is too high and playback has been  
stopped automatically.  
Lower the surrounding temperature and wait  
for a while to cool off MD changer.  
ERROR 2  
ERROR 3  
ERROR 6  
An MD inside the MD changer is not loaded. This is a failure of MD changer’s mechanism  
and consult your store of purchase.  
An MD inside the MD changer cannot be  
played due to scratches, etc.  
Replace with a non-scratched, non-warped  
disc.  
An MD inside the MD changer cannot be  
played because it is loaded upside-down.  
Eject the disc then reload it properly.  
Displayed when a non-recorded MD is  
loaded in the MD changer.  
Load a pre-recorded MD in the MD changer.  
DXZ938R  
35  
 
Error Display  
ERROR 2  
Cause  
Measure  
A DISC inside the DVD changer cannot be  
played.  
This is a failure of dvd mechanism and con-  
sult your store of purchase.  
ERROR 3  
ERROR 6  
A DISC cannot be played due to scratches,  
etc.  
Retry or replace with a non-scratched, non-  
warped-disc.  
A DISC inside the DVD changer cannot be  
played because it is loaded upside-down.  
Eject the disc then reload it properly  
Set the correct Parental level.  
ERROR P  
ERROR R  
Parental level error  
Region code error  
Eject the disc and replace correct region  
code disc.  
If an error display other than the ones described above appears, press the reset button. If the problem  
persists, turn off the power and consult your store of purchase.  
36  
DXZ938R  
 
10. SPECIFICATIONS  
Radio section  
Tuning System: PLL synthesizer tuner  
General  
Output Power: 4 31 W (DIN 45324, +B=14.4V)  
Receiving Frequencies:  
Power Supply Voltage:  
FM : 87.5 to 108 MHz (0.05 MHz steps)  
MW : 531 to 1602 kHz (9 kHz steps)  
LW : 153 to 279 kHz (3 kHz steps)  
14.4 V DC (10.8 to 15.6 V allowable),  
negative ground  
Power Consumption: Less than 15 A  
Speaker Impedance: 4 (4 to 8 allowable)  
Auto Antenna Rated Current: 500 mA or less  
CD player section  
System: Compact disc digital audio system  
Frequency Response: 5 Hz to 20 kHz (± 1 dB)  
Signal to Noise Ratio: 100 dB (1 kHz) IHF-A  
Dynamic Range: 96 dB (1 kHz)  
Distortion: 0.01%  
Weight:  
Main unit: 1.7 kg  
Remote control unit: 30 g (including battery)  
Dimensions:  
Main unit :  
178 (W) 50 (H) 155 (D) mm  
Remote control unit:  
32 (W) 56 (H) 24 (D) mm  
Note:  
• Specifications and design are subject to change without notice for further improvement.  
10. CARACTÉRISTIQUES TECHNIQUES  
Section radio  
Système de syntonisation:Tuner à synthétiseur PLL  
Données générales  
Puissance de sortie:  
4 31 W (DIN 45324, +B = 14,4 V)  
Fréquences de réception:  
FM : 87,5 à 108 MHz (pas de 0,05 MHz)  
PO : 531 à 1602 kHz (pas de 9 kHz)  
GO : 153 à 279 kHz (pas de 3 kHz)  
Tension d’alimentation:  
14,4 V CC (10,8 V à 15,6 V admissible),  
masse négative  
Consommation: Inférieure à 15 A  
Impédance de haut-parleurs:  
4 (4 à 8 W admissible)  
Section lecteur de CD  
Système:  
Courant nominal d’antenne automatique:  
500 mA ou moins  
Système audionumérique de disque compact  
Réponse en fréquence: 5 Hz à 20 kHz (± 1 dB)  
Rapport signal/bruit: 100 dB (1 kHz) IHF-A  
Plage dynamique: 96 dB (1 kHz)  
Distorsion: 0,01%  
Poids:  
Appareil principal: 1,7 kg  
Télécommande: 30 g (avec la pile)  
Dimensions:  
Appareil principal:  
178 (L) 50 (H) 155 (P) mm  
Télécommande:  
32 (L) 56 (H) 24 (P) mm  
Remarque:  
• La conception et les caractéristiques techniques sont sujettes à modification sans préavis pour des raisons  
d’amélioration.  
302  
DXZ938R  
 

Craftsman Chipper 247775890 User Manual
Craftsman Garage Door Opener 13953978SRT User Manual
Cuisinart Oven TOB 30 User Manual
Delta Electronics Power Supply SIL720 User Manual
Dimplex Heat Pump SI 24TE SI 37TE User Manual
Edelbrock Automobile Parts 1580 User Manual
EverFocus Security Camera EQH5200 User Manual
Ferris Industries Lawn Mower is3100z series User Manual
Freecom Technologies Network Card FHD 1 User Manual
Gefen Switch EXT DVI 441DL User Manual